MASAVA Lime Remover Extra

Masava Kemi ApS

MASAVA Lime Remover Extra


MASAVA Lime Remover Extra is an effective lime removing product combined with soaps and tensides.

MASAVA Lime Remover is used for primary cleaning and removal of lime and rusting / deposits on tiles, stainless steel, sanitary installations such as wash basins and lavatory bows, that are very used or very soiled.

The lime remover is an acid product, why you must pay much attention NOT to use it on marble, which can be eroded by strong acids.

NB! The product must not come into contact with chlorine-containing products, because. This will liberate a highly toxic gas.


Dilute MASAVA Lime Remover Extra with water. Use 1 part lime remover to 10 parts water. First time cleaning or where a very effective cleaning is required the lime remover may be used concentrated or less diluted.

Apply the product with cloth, brush, sponge or a mop. Let it work for 5-10 minutes. Rinse off with clean water.

Treatment of floors for the first time: First make the floors wet, then treat a few sq. meters at a time. Let the product work for 1-2 minutes. Rinse off the treated surface with water. When the floor afterwards has become dry, it should be treated with MASAVA Tile Oil that seals the floor surface, which prevents lime and dirt from attaching again.


The product is an aqueous solution of cationic tensides, organic and unorganic acids, glycolether and colour.

Personal Safety

Wear specific protective clothing, gloves and eye/face protection during handling


MASAVA Lime Remover Extra is a waterbased acid cleaning product for removal of very heavy lime- and rustformations in tanks, pipes, pumps, filters, cooling systems, kettles, water-evaporators and from floors and walls

Product attributes
Physical StateLiquid
Danger SymbolCorrosive, health hazard
pH concentrated0,0
Specific gravity1,09 g/ml
Solubility in waterSoluble
1000 L

MASAVA Lime Remover Extra